Deactivate the Ride Control Light With Ease

As an Amazon Associate, I earn from qualifying purchases.

Does your service ride control light seem to flick on more often than it should? It doesn’t matter if you have a luxury car – all vehicles can experience this issue. Spend some time investigating why and how you can fix the problem before it becomes worse!

With a wide variety of reasons to account for the activation of your service ride control light, this article will not be exploring these causes. Instead, it seeks to provide an in-depth guide on how best to turn off this important indicator when its presence is detected.

Don’t worry, this issue can easily be resolved! Instead of stressing over it, why not make fixing an enjoyable process? Read on to find out how you can have fun while resolving the problem.

Effective Strategies to Deactivate Service Ride Control Light

how to turn off service ride control light

Way 1: General Methods/well-known method

With a few easy steps, this method is an effective approach for getting the job done on almost any device. Rest assured that success can be achieved with minimal effort!

Step 1: Remove the Compressor Cover

To get started, seek out a set of resistors trusted by professionals in the automotive industry. Make sure they stay within 1.5 and 3 ohms for optimal performance. Then take off the compressor cover at the rear shock to complete the installation.

Step 2: Find the Wiring

To continue with the next step, seek out and identify the wiring. Looking under your vehicle’s frame you’ll find an air compressor – sitting atop it is where this wire will be located.

Step 3: Cut the Wire

Pinpoint the wires you need to cut – blue and white from the solenoid exhaust valve. Search for this in the upper part of your air compressor if needed, then snip accordingly!

Step 4: Wiring steps

After precisely cutting the wire as instructed, ensure a secure attachment of the resistor by utilizing a cable stripper for perfect stripping and twisting. Then firmly twist both blue and white ends to promote longevity – especially in challenging driving conditions.

Step 5: Secure the Connection

Make a strong, lasting connection between your resistors and the wire with an electrical tap. This form of security guarantees that both ends remain firmly attached to each other without any worry or hesitation about them becoming loose or disconnected later down the line.

Step 6: Reattach the Wire

The last hurdle to navigate when it comes to overriding the service ride control is reattaching the cover around the air compressor. Take extra precaution with connecting any wires, as this pivotal step should not go overlooked due to its delicate nature.

Way 2: Change the Compressor

  • First, identify the issue. To do it, start your car/vehicle and ON the AC of your car.
  • Check whether the AC unit is running or not. If the air conditioner is not working evenly or engaged inappropriately, understand the AC compressor has broken.
  • Replace the old A/C compressor with a new one.
  • If you can’t do this, take your car to a workshop or mechanic. Or, if there is a leak in the A/C compressor, use a leak sealer to clog the perforations.

Way 3: Remove the 30 amps fuse

Faulty service suspension is often linked to a worn-out fuse. To remedy the issue, locate your car’s 30 Amp fuse in its front side fuse box and remove it for further inspection or replacement.

Way 4: Change the Suspensions Unit

For any driver looking to maximize their vehicle’s performance, suspension kits are essential. However, when worn out or broken they can lead to a bumpy ride on treacherous terrain – not exactly ideal! Make sure you keep tabs on your rear shocks in particular as wear and tear may result from air leaks that cause the service control light error message. Take timely action if so for a more comfortable driving experience!

Way 5: Power up the System

It is important to maintain optimal power levels for vehicle performance. If your dashboard displays an error message, it could mean that the lack of power has caused other issues like an “air service suspension ride control” light remaining on. To get back up and running again, start by checking fuel levels and cleaning the air filter – this should help restore efficiency quickly. Additionally, there are various steps you can take to ensure future high-performance results!


Deactivating the ride control light is an essential step for anyone who wants to keep their car in optimal condition. This light can indicate a number of problems, from something as simple as a loose gas cap to more serious issues like a faulty oxygen sensor. By following the steps above, you can deactivate the ride control light easily and quickly, allowing you to get back on the road and enjoy your car.

More resources: